Char-Broil NATURAL GAS CONVERSION KIT 7116572 - Manual (Page 22)

Return Sideburner to Shelf. Make sure Burner engages Sideburner Valve. See illustration below for correct burner-to-valve
engagement.
Secure Burner to Shelf with two Washers and two Screws.
Reconnect Ignitor wire to Electrode.
Place Sideburner Grate onto Sideburner Pan.
G4
Valve
Sideburner
CORRECT BURNER-TO-VALVE
ENGAGEMENT
Section G Con’t.
Reinstall Heat Diffusers, Cooking Grates and Warming Rack, reference illustration Section A1. for reinstallation.
TROUBLESHOOTING
EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department.
Emergencies
Gas leaking from
cracked/cut/burned
hose.
Possible Cause
• Damaged hose.
Prevention/Solution
• Turn off gas at at source. If anything but burned, replace
parts. If burned, discontinue use of product until a plumber
has investigated cause and corrections are made.
Prevention/Solution
• Make sure gas hose is properly connected to grill. If hose is
properly connected, make sure gas source is turned on.
Troubleshooting
Possible Cause
• No gas flow.
Problem
Burner(s) will not
light using ignitor.
GAS ISSUES:
Burner(s) will not
match light.
Flames blow out.
• See
• Match will not reach.
• Improper method of match-lighting.
• Natural gas valve not fully open.
• Inadequate gas pressure.
“GAS ISSUES:” .
• Use long-stem match (fireplace match).
• See “Match-Lighting” section of Grill Use and Care.
• Open Natural Gas Valve to full open position.
• Call gas company.
TROUBLESHOOTING
EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department.
Emergencies
Gas leaking from
cracked/cut/burned
hose.
Possible Cause
• Damaged hose.
Prevention/Solution
• Turn off gas at at source. If anything but burned, replace
parts. If burned, discontinue use of product until a plumber
has investigated cause and corrections are made.
Prevention/Solution
• Make sure gas hose is properly connected to grill. If hose is
properly connected, make sure gas source is turned on.
Troubleshooting
Possible Cause
• No gas flow.
Problem
Burner(s) will not
light using ignitor.
GAS ISSUES:
Burner(s) will not
match light.
Flames blow out.
• See
• Match will not reach.
• Improper method of match-lighting.
• Natural gas valve not fully open.
• Inadequate gas pressure.
“GAS ISSUES:” .
• Use long-stem match (fireplace match).
• See “Match-Lighting” section of Grill Use and Care.
• Open Natural Gas Valve to full open position.
• Call gas company.
22
Sideburner Grate
Sideburner
Washers
Screws
Electrode