Char-Broil NATURAL GAS CONVERSION KIT 7116572 - Manual (Page 15)

D5
Pull the Rotisserie Control Knob off of Valve Stem.
Remove screws and washers that secure Bezel to the Control Panel. Save removed Bezel for converting back to LP Tank Gas.
Install new Natural Gas Bezel provided with Kit (see illustration below) in place of old Bezel onto Control Panel, and secure using
previously removed screws and washers. Assure proper alignment with control knob before fully tightening.
Press Control Knob back onto Valve Stem. Make adjustments needed to Bezel for free movement of Control Knob.
Note: New bezel will
change the rotation for the control knob to properly control ignition and flames for your grill.
Small Bezel
Hi
Low
OFF
Med
E1
6
Open Sideburner Lid and remove the Sideburner Cooking Grate.
Remove Screw from Sideburner Electrode. See illustration below.
Slide Sideburner Electrode out of Collector Box.
Sideburner
cooking grate
NOTE:
Sideburner lid shown removed for
clarity only. Do not remove
sideburner lid during conversion.
Screw
Sideburner
Electrode
Collector box
Sideburner
Electrode
Section D Con’t.
Section E
15
Control Panel
Rotisserie Burner
Control Knob
Bezel
Valve
Stem
Lock Washers
Screws