Philips AZ 6825 - Manual (Page 13)

IN-CAR USE
• Rnd a good and safe place for the CD player, on a horizontal, vibration-free and stable
surface where it is not dangerous or in the way of the driver or passengers, see also
'Accessories'.
• Avoid excessive heat from the car heating or from direct sunshine, e.g. when parking in the
sun and avoid moisture, dust and dirt
Supply from the cigarette lighter socket
- Use the voltage converter from the accessory kit SBC 3557 for
power supply from the cigarette lighter socket ¡only fora 12 V
car battery, negative grounding). The converter delivers 6 V/-
500 mA Direct Current, ❖ -®- plus-pole to the centre
pin.
• First connect the DC-plug to the 6 V DC socket.
• Then insert the voltage converter into the cigarette-lighter socket. If necessary, clean the
cigarette-lighter socket to obtain a good electrical contact.
• Remove the converter from the cigarette-lighter socket when the CD player is not in use
and also when listening to the car radio.
Car radio connection
- If your car radio is provided with a LINE IN socket preferably connect
this LINE IN socket to the PHDNES ii/REMOTE socket of the CD
player using the signal lead SBC 1085.
- For a car radio/cassette player without LINE IN socket, you can use
the cassette adapter from the accessory kit SBC 3557 as follows;
• Turn down the volume of your car radio cassette-player.
• Connect the cassette-adapter plug to the PHONES O/REMOTE
socket of the CD-player. Make sure that the lead does not hinder
your driving.
• Switch off the autoreverse function (if present) of the car cassette
player.
• Slide the cassette carefully into the car radio cassette player. Do not remove the protective
film from the metal head of the cassette adapter.
• Start the CD player and adjust the sound with the car radio controls.
• To remove the cassette, press the eject button of the cassette player.
Resume
• If you switch off the car ignition, the CD player is also switched off. If RESUME was
switched on, and you switch on the ignition again, the CD player will start from the
position where it has been stopped as soon as you press PLAY/PAUSE.
13