Philips FW830C - Manual (Page 15)

OPEHMiiG THE SYSTEM
To start the demonstration mode
• Press and hold ■ (on the system only)
for five seconds \Nhevi the system is in
standby mode.
^ The demonstration will begin.
Easy Set
EASY SET allows you to store all available
radio stations automatically.
• Press and hold STANDBY«ON (on the
system onlyjior five seconds: when
the system is in standby or
demonstration mode.
" '' will be displayed,
and followed by" "and then
Note:
- When EASY SET is used, all previously
stored radio stations will be replaced.
Switching the system ON
• Press STANDBY«ON (on the system
0/7/W, CD, TUNER, TAPE orAUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY®ON again or (!) on
the remote control.
The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or AUX
The display indicates the selected
source.
Note:
- For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCH, Laser Disc player,
DVD player or CD Hecorder) to the AUX
IN terminals.
Selecting the Equalizer
Display
You can select the desired equalizer display
for the system. You must not press the DSC
button on the system before using the JOG.
• Rotate the JOG to select the desired
Equalizer Display, PEAK PIOLD, MIDDLE
OUT, TOP DOWN, NORMAL, or NITE
MODE.
The selected display will be shown.
PEAK HOLD Display
TOP DOWN Display
Note:
- In NITE MODE, all lights will be
switched offend the display brightness
will be dimmed.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the Q
socket at the front of the system. The
speakers will be muted.
AUTO DIGITAL SOUND CONTROL
(DSC)
® Press and hold DIGITAL SOUND
CONTROL (DSC) for about 5 seconds.
The current music is sampled and it
automatically select the most
suitable DSC setting.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the
system to suit your type of music.
® Press DIGITAL SOUND CONTROL
(DSC) to select OPTIMAL, TECHNO,
ROCK, CLASSIC, VOCAL or JAZZ.
^ The selected digital sound is
encircled.
or " will be displayed
''.X'" is the pre-selected level.
VEC will be switched off.
You can change the digital sound setting
level for ail except CLASSIC with the JOG.
• First select the DSC feature, then rotate
the JOG until the desired digital sound
setting level is reached.
The digital sound setting level will
increase or decrease between level 1
and 5.
Note:
- For neutral setting, select CLASSIC and
switch off DBB.
15