Enjoying dolby pro logic surround sound, Enjoying two-channel digital stereo sound – Philips DVD420AT User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Warning
Do not set “AUDIO OUT SEL.” to “AC-3" via the on-screen displays [28^ ¡2^ unless you are connecting (via the PCM/AC-3 DIGITAL AUDIO OUT
jack) an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers.
Enjoying Dolby Pro Logic Surround Sound
Enjoying Two-channel Digital Stereo Sound
Dolby Pro Logic Surround
You can enjoy Dolby Pro Logic Surround sound by connecting an
amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
■ With an amplifier equipped with Dolby Digital (AC-3),
connect the equipment the same way as described in “Enjoying
Dolby Digital (AC-3) Sound’’ . Refer to that amplifier’s
owner’s manual and set the amplifier so you can enjoy Dolby Pro
Logic Surround sound.
■ With an amplifier not equipped with Dolby Digital (AC-3),
connect the equipment as follows.
Connect one or two rear
speakers.
^___ The output sound from the
Rear speaker rear speakers will be
monaural even if you
connect two rear speakers.
Set “AUDIO OUT SEL.” to “PCM” via the on-screen
displays.
Two-channel Digital Stereo
You can enjoy Two-channel Digital Stereo sound by connecting
an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
Set “AUDIO OUT SEL.” to “PCM” via the on-screen
displays. [28> (29>
¡O)
(a)
Notes
' Connect the speakers according to the instruotions in the owner's manual for the speaker system.
' Refer to the owner’s manual of the connected equipment as well.
' When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any
connections.
' Tho output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
' Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
14