Philips PCA532K - Manual (Page 18)

9. Click Finish to complete the installation of the REALmagic application software. At this
stage the setup program automatically launches REALmagic Configuration.
10. Click Auto calibration. This adjusts the border and color calibration simultaneously. The
monitor screen flickers for about 5 to 10 seconds during this process and then becomes
normal. Auto calibration usually does a fine job with the border, however, if the border is
not adjusted properly, or if you do not launch the REALmagic configuration during
installation bf the software for REALmagic Hollywood Plus, refer to the Border Adjust­
ment and Color Calibration section of the user’s manual to make further adjustments.
User Manuals
The user manuals for the software application can be found on the CD-ROM supplied with
this kit in the Manuals sub-directory. These manuals are formatted as Acrobat files (PDF). To
be able to read them, the Acrobat Reader program must be installed on your computer. If this
program is not already installed proceed as follows:
1. Place the CD-ROM delivered with the kit in the DVD-ROM drive.
2. From the Windows taskbar, click the Start button, and then select Run...
3. Type D:\Manuals\Acrobat\Setup and click OK. (If your DVD-ROM drive is assigned
a different letter, use that letter instead of D.)
Follow the instructions on the screen to set-up the Acrobat reader.
16 Philips DVD/ROM kit