Manual tv channel search satellite receiver – Philips 21PV340/07 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Manual TV channel search
Satellite receiver
In certain cases the 'Automatic TV channel search' may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
m Press the [
menu
I button on the remote control. The main
menu will appear.
in Selectthe line'MANUAL SEARCH'with the IT
p
- lor
I tp + I button and confirm with the
I button.
MANUAL SEARCH
PROGRAMME NUMBER
FREQUENCY
DECODER
< POl
754
OFF
STORE: OK
in Selectthe line 'FREQUENCY'with the menu buttons
[IP
— lor I
tP +
Enter the frequency of the desired TV channel with the
number buttons fOl.
D>
If you don't know the frequency of the desired TV
channel, press I ^+->- Tin line 'FREQUENCY' to
start the automatic search.
Repeat automatic search until you have found the
desired TV channel. A changing frequency number
will appear on the TV screen.
m If you want to allocate a decoder, in line 'DECODER'
select'ON'using the button I
I.
m To store the TV channel, press [Ml- 'STORED' will
briefly appear on the TV screen.
If you would like to search for more TV channels,
start again at step m-
s To end, press the I
menu
I button.
You can receive channels from the satellite receiver via the
scart socket I
ext
I
.
Ш
m Use the number buttons [o] on the remote control to
selectthe channels on the TV-Video Combi.
To do this, selectthe channel number'El' using the
button [o] on the remote control. You will have to select
the channels to be received by the satellite receiver on
the receiver itself.
Гз1
In the line'PROGRAMME NUMBER', selectthe function
with the buttons I •*- Inr I
lor use the
number buttons'[
m
]'on the remote control to selectthe
desired programme number, e.g.: 'РОГ.