Tuning to preset radio stations, Tuner – Philips FW338C User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNER
Manual programming
1
Press
TUNER.
2
Press
TUNER
(BAND) to select the desired waveband
:FMorAM.
3
Press
PROGRAM
for less than one second.
— PROGRAM flag, the frequency and preset number
start flashing.
— The next available preset number will be displayed
for selection.
4
Press
TUNING •«
or
►►
to tune to the desired
frequency.
• If you wish to store the radio station to another preset
number, press
PRESET
T or A to select the desired
preset number.
5 Press
PROGRAM
again.
— PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
Notes:
- When 40 radio stations are stored and you attempt to
store another radio station, the display will show
’ PROGRRtl ruLLIf you want to change an
existing preset number: repeat steps 4 and 5.
-You can cancel manual programming by pressing
STOP ■ on the system only.
- During programming, if no button is pressed within 20
seconds, the system will exit program mode
automatically.
Tuning to Preset Radio Stations_______
• Press
PRESET
T
or
A
to select the desired preset
number.
— The preset number, frequency and waveband
appear on the display
20