Philips FW338C - Manual (Page 17)

CD
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN'CLOSE.
— The CD compartment slides out.
3 Load a CD with the printed side up in the right tray.
• You can load another disc in the left tray.
• To load the third disc, press the DISC CHANGE
button.
— The CD changer carousel will rotate until the empty
tray is at the right hand side and is ready for
loading.
-• Playback will always start with the disc in the outer
right disc tray.
4 Press DPEN»CLOSE to close the CD compartment.
— The total number of tracks and playing time of the
last selected disc appear on the display.
Playing a CD
3 CD Direct Play
You can play a CD directly by pressing the 3 CD DIRECT
PLAY (1 - 3) buttons. The CD player will stop at the end
of playback of the selected disc.
- When the button is lighted, it indicates that there is a
disc loaded in the disc tray.
1 Press PLAY ► to start playback,
-* The disc tray, track number and elapsed playing
time of the current track appear on the display.
• To interrupt playback, press PAUSE
II.
-* The playing time flashes.
• To resume playback, press PLAY ► again.
2 To stop playback, press STOP ■.
Note:
- All the available discs will play once, then stop. When
the CD has stopped playing, the system will switch to
the standby mode after 15 minutes if no button is
pressed.
Disc Change__________________________
You can change the outer 2 discs while the third inner
disc is at the stop or playing mode.
1 Press DISC CHANGE.
— The CD compartment slides out.
2 Replace the discs in the left and right disc trays.
• If you press DISC CHANGE again during playback,
the CD will stop playing.
— The CD carousel tray will rotate until the inner tray
is at the right hand side and is ready for changing.
3 Press OPEN»CLOSE to close the CD compartment.
Selecting a desired track
Selecting a desired track at the stop mode
1 Press PREV M or NEXT ►! until the desired track
appears on the display,
2 Press PLAY ► to start playback.
— The selected track number and elapsed playing
time appear on the display.
Selecting a desired track during playback
1 Press PREV H or NEXT ►! until the desired track
appears on the display.
— The selected track number and elapsed playing
time appear on the display.
• If you press PREV M once it will skip to the
beginning of the current track and play the track again.
Searching for a particular passage
during playback_______________________
• Press and hold or ►► until the desired passage is
located.
— The volume will be reduced.
• Play returns to normal when
«
or ►► is released.
17