beautypg.com

Before you start safety instructions, Mains connection, About this manuai – Philips STU801/05R User Manual

Page 4: Mains connection about this manual, J j before you start safety instructions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

BEFORE YOU

START

j

y

J J

BEFORE YOU START

Safety Instructions

To avoid short-circuits, w/hich may cause fire or electric shock, do not expose
this Philips STU 801 Satellite Receiver to rain or moisture.

Dangerous voltage inside. Do not open the cabinet.

There are no user serviceable parts inside.

Repairs should be carried out by qualified service personnel only.

NEVER connect or modify cables while the Receiver is connected to the
mains. Always first remove the plug from the wall socket.

Ensure that no objects or fluids pass through the ventilation openings.

If liquid is spilt into the Receiver, disconnect the Receiver from the mains and

consult a qualified service technician.

Do not put your Receiver close to an external source of heat (radiator, etc.)

Ensure that air can circulate freely through the ventilation openings of the
Receiver.

Avoid using the Receiver on soft surfaces or near appliances generating
strong magnetic fields (eg motors, transformers).

Do not use your Receiver in dusty places or where it may be subject to

vibration.

Avoid using your Receiver immediately after moving from a cold to a warm

location and vice versa, or under conditions of high humidity.

if you have to transport your Receiver, avoid violent shocks.

Your Receiver supplies 14 or 18 V DC voltage to your satellite dish antenna.

Make sure you only connect your satellite dish to the satellite dish inputs and
nothing else.

For cleaning, use a damp chamois leather - never use an abrasive.

Mains Connection

Before connecting the Receiver to the mains, check that the mains supply

voltage corresponds to the voltage printed on the rear panel of your Receiver.

If the mains voltage is different, consult your dealer.

NEVER connect or modify cables while the Receiver is connected to the
mains. Ensure that the mains plug is not plugged in to the mains supply
before proceeding further.

About This Manuai

This is a manual to help you with the installation and operation of your new

Satellite Receiver.

This circle in front of a sentence indicates that you have to

do something.

This arrow in front of a sentence indicates the result of what
you have done.

o

I>

J

GB2

This manual is related to the following products: