Connections a connect the polariser, Aim your dish, Additional connections audio l/r – Philips STU801/05R User Manual
Page 10: Decoder/descrambler, Aim your dish additional connections, Ox ox, Connect the polariser
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS a
Connect the Polariser
J
Signais from a satellite are transmitted with different polarisations.
There are 4 kinds of polarisation:
Direct Broadcast Satellites DBS (TV satellites like TDF, TV SAT and TELE-X)
transmit with circular polarisation:
Left hand circular = L, or Right hand circular = R.
All other satellites (such as ASTRA) transmit with linear polarisation:
Horizontal = H, or Vertical = V.
For proper reception, you may need a device called a Polariser which is
located in the LNC assembly of your dish antenna. This depends on what
type of dish antenna you have.
If you have a Mechanical Polariser, connect the 3 small leads from your
antenna cable to the Polariser connectors on the back of your Satellite
Receiver:
O
the dark lead to GND (coloured Green)
O
the red lead to +5V — (coloured Red)
O
the white lead to -ru (pulse - coloured White)
If you have an Electro-magnetic Polariser, connect the 2 small leads from
your antenna cable to the polariser connectors on the back of your Receiver:
O
the dark lead to the right hand Yellow connector
O
the red lead to the left hand Yellow connector
J
Aim your dish
Consult the Satellite Programme Guide in the back of this manual and choose
a programme number on the satellite at which you will aim your dish.
Now finalise installing your dish following the instructions supplied with the
dish. If you cannot obtain a satisfactory picture, see section 6 ‘FAULT
FINDING’.
Additional connections
AUDIO L/R
If you wish to use your hi-fi installation to listen to satellite programmes then
you must connect it to the audio sockets.
Connect the output sockets AUDIO L (left channel) and AUDIO R (right
channel) to a pair of left and right input sockets on your hi-fi installation.
Do not connect AUDIO UR to the sockets marked PHONO of your hi-fi installation.
DECODER/DESCRAMBLER
Your Receiver has the capability of accepting up to two external decoders via
the DECODER/DESCRAMBLER connector.
This DECODER/DESCRAMBLER connector may also be used to connect
another peripheral or (MAC) satellite Receiver, in this case, select
programme 0 (AUX) to watch this peripheral.
Consult your dealer for a suitable lead.
ox OX
+ 5V=
Jl
GND
XX
CURR
-80 +8
ENT
OmA
,
0000000000
>0000000000
DECODER/DESCRAMBLER
GB8