Lock a programme, Unlock a programme, Receiver lock – Philips STU801/05R User Manual
Page 15: Vcr record/replay using euroconnectors, Lock a programme unlock a programme receiver lock, Op^awh
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J
Lock a Programme
O
Press MENU followed by 6
[>
A message TO LOCK ENTER PIN will appear.
O
Enter your PIN
>
A message LOCKED will appear.
If you now select a locked programmed, the message
PROGRAMME LOCKED ENTER PIN will appear.
O
Enter your PIN.
If the PIN is correct, the programme will be displayed.
Unlock a Programme
O
Select the programme you want to unlock entering your PIN
code
O
Press MENU followed by 6
1
>
A message TO UNLOCK ENTER PIN will appear
O
Enter your PIN
>
A message UNLOCKED will appear, indicating that this
programme is now permanently unlocked.
Receiver Lock
To avoid accidental changes or unauthorised reprogramming of your Re
ceiver, you can switch on the Receiver Lock. This disables the Installation
menus (MENU 1 and MENU 2) and the frequency scan (MENU 3).
To enable the Receiver Lock, select Programme 0 (AUX) and follow the
procedure to lock a programme.
To regain access, follow the procedure to unlock Programme 0 permanently.
VCR record/replay using Euroconnectors
When using a Euroconnector to connect a VCR, the following must be noted.
To record from the satellite Receiver to a VCR, it will be necessary to select
AUX or AV on the VCR as the programme to record.
When replaying the VCR through the Satellite Receiver, switch the Satellite
Receiver to standby.
Note: This method of replaying is only possible if the TV is also connected using a SCART
lead.
OP^AWH
J
GB13