Operation i instant timer/sleep timer, The parental lock, Personalising the pin – Philips STU801/05R User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION I Instant Timer/Sleep Timer
I
The Instant Timer enables you to record transmissions instantaneously and
" switch off the Receiver at a time you set.
To operate the Instant Timer/Sleep Timer
O
Press the O Key
t>
The 9 light will start to flash.
The current time will be assumed as the start time and the stop time will
default to half an hour from the start time.
Use the numeric keys on the remote control to change the stop time.
O
Press STORE.
>
The 9 light will now stay on.
All remote control commands will now be ignored.
The Receiver will go to standby when the stop time has been reached.
O
Press the O key again to cancel the
Instant Timer/Sleep Timer.
t>
A message SLEEP TIMER CANCELLED will be displayed.
The Parental Lock
The parental lock feature of the Receiver allows you to ‘lock out’ some or all of
the satellite programmes. In simple terms, you create a personal identification
number (PIN) and allocate it to the programme you wish to lock to prevent
unauthorised viewing. Once a programme is locked, it can only be viewed by
re-entering the PIN. It is not essential to personalise the PIN, but it is recom
mended.
O
O
J
Personalising the PIN
O
Press MENU followed by 7
O
Enter 1234 (the default setting) using the numeric keys on
your remote control.
t>
The Receiver will now ask for your NEW PIN.
O
Enter a new PIN (4 numbers)
t>
The Receiver will ask you to CONFIRM PIN.
o
Re-enter your new PIN.
l>
A message CONFIRMED will appear on the screen.
If your NEW PIN and CONFIRM PIN were not identical, a message FAILED
will be displayed. It will be necessary to repeat the whole sequence.
DO NOT FORGET YOUR PIN!!!
If you forget your PIN you will have to contact your dealer.
GB12