Corinex Global Powerline Router - Manual (Page 18)

Line Frequency: 60/50Hz (USA / Europe, AUS)
Power Output to AP: 6.5VDC, 1A
2 Installation Overview
This part of the User Guide will assist you with your successful initial
installation and configuration of your
Corinex Powerline Network and
help you with settings, which you need to configure for your Internet
connection to be shared through the Ethernet or Powerline medium.
Step 1: Connecting the Router – First you need to connect cables and
connect the Router both to the power and to the Internet connection; and,
optionally to your Ethernet connected computers.
Step 2: Connecting the Computers – Then you will need to connect the
computers to the Router, in order to be able to configure the settings of
the Router. These steps differ between Ethernet and Powerline connection
and also it differs between different sorts of operating systems and
computers.
Step 3: Configuring the Router – The last step required is to configure
your
Corinex Powerline Router settings according to your Internet
connection.
15
Instalation Overview
Corinex Powerline Router User Guide
Fig.2.1 Corinex Powerline Network Installation Example