Philips VHS VR6393 - Manual (Page 9)

STORING TV STATIONS
5
— If you know the channel numbers of the TV stations you want
to store:
see the section 'Direct channel storage’.
— If you do not know the channel numbers of the TV stations
you want to store:
see the section ‘Channel search and storage’.
You can store up to 48 preferred stations.
Direct channel storage
(i) Switch on the TV.
(Don the TV select t
video recorder.
® Switch on the video recorder using 10-
(D
On the TV select the preselection (program) number for the
video recorder.
• if necessary, press C/P until the Display shows ‘P’ and a
preselection number.
0 Select the desired preselection number using + or — or the
digit buttons (0-9) on the remote control.
To change the number slowly, press -t- or — repeatedly.
To change the number quickly, press and hold -f or —.
Select the same preselection numbers for the TV stations on the
video recorder as those on your TV.
0 Press STORE.
The Display shows a flashing channel number for the TV station
which is being received and the preselection number.
cm no
J 1 Ul^t-
.... 3>-i
C “L 1
^ i 1 1 '
O i
/ 1
0 Select the desired channel number using -|- or — or the digit
buttons (0-9) on the remote control.
Note:
With cable TV the following channel numbers have to be
entered for the special channels:
Special channel Select Special channel
(Hyperband)
Select
S1 80 S21 100
S2 81 S22 101
S3 82 S23 102
S4 83 S24 103
S5 84 S25 104
S6 85 S26 105
S7 86 S27 106
S8 87 S28 107
S9 88 S29 108
S10 89 S30 109
S11 90 S31 110
S12 91 S32 111
S13 92 S33 112
S14 93 S34 113
S15 94 S35 114
S16 95 S36 115
S17 96 S37 116
S18 97 S38 117
S19 98 S39 118
S20 99 S40 119
S41 120
© Press STORE again to store the TV channel on the
preselection number.
• Repeat steps © to © for all preferred channels.
Channel search and storage
0 Switch on the TV.
0 On the TV select the preselection (program) number for the
video recorder.
0
Switch on the video recorder using
10
and select
preselection (program) number 1 using H- or — or the digit
buttons (0-9) on the remote control.
0
Press SEARCH.
The video recorder searches for a TV station.
The Display shows for example:
Ti (h ic
1 Uiv;_
_ o o
C tu
0 »
1 1
• When a TV station is found, it appears on the TV.
The Display shows for example:
C TnQC
_i I
cn
o
• If the picture quality on the TV is poor, press SEARCH again.
• If you want to cancel the search, press lO or ■.
• Through interferences in some cable TV networks, it may
hapen that the search run skips a TV channel. If this happens,
this TV channel can be selected like mentioned in chapter ‘Direct
channel storage’.
0
Select the desired preselection number using -f or — or the
digit buttons on the remote control.
To change the number slowly, press + or — repeatedly.
To change the number quickly, press and hold -I- or —.
Select the same preselection numbers for the TV stations on the
video recorder as those on your TV.
@) 5