Interlogix XL LCD Keypad Plus User Guide - Manual (Page 45)

21-3600E rev1.3 Welcome Alarm Status Admin Reference 37
Command Result
# # Cancels any keys previously
entered.
Command Result
# If performing a “ ”
command with UID/PIN,
insert a "
# " key between
command and UID/PIN
entry (e.g. “
1 # 341
4141 ” for user 341,
pin=4141 trying to arm the
area:
1).
No Commands (Simple Access)
Door Mode Notes
Card Only If a UID/PIN is entered, it will be
ignored
Card & PIN UID is not required since the card
automatically identifies the
Card or UID/PIN or
UID/PIN Only If card is presented, it will be ignored.
– User ID
With Commands
Door Mode Notes
Card Only If a UID/PIN is entered, it will be
ignored
Card & PIN Card badging must always be done
before the PIN entry.
Card or UID/PIN or
# Pressing “#” is required between the
command and uid/pin entry.
UID/PIN Only # Pressing “#” is required between the
command and uid/pin entry. (Note
# in PIN Only systems)
– Command