Interlogix XL 4 Zone LCD - Manual (Page 7)

8 Zone Keypad
Operation 2 Zone Keypad
Operation
22-9050 v1.3 MONITOR ISM™/AFx™ Multi-Tenant Security System User Guide 5
2 3
5 6
8 9
0
1 2 3 4 5 6 7 8
S T
f
4
7
1
X
!
When the system is Fully ON, the light under the key symbol on the keypad will flash. No
protection point lights will be lit.
When the system is in STAY, because you are STAYing inside, only the doors and windows are
protected. The key symbol light is on steady and will not flash.
When the system is in the STAY mode, motion detectors will detect movement and cause their keypad
sensor zone light to come on but an alarm will not be generated. Motion detectors are only on when the
system is Fully ON and you have left the protected area.
Turning to STAY with entry/exit delay tone. A user setting the system to this level can exit while another
user can remain inside the protected area. An entry delay occurs so a user can come in and turn off while
a user who has been remaining inside is alerted of an entry being made.
Press
Or, if programmed, Secure Arm by pressing this
button and then entering your PIN.
Quick Arm
Press then
Or, if programmed, Secure Arm by pressing these
buttons and then entering your PIN.
STAY with audible exit delay. No entry delay – instant Alarm if door opened.
Press
Or, if programmed, Secure Arm by pressing this
button and then entering your PIN.
Quick Arm:
Press then
Or, if programmed, Secure Arm by pressing these
buttons and then entering your PIN.
Turn system ON with silent exit delay. Entry delay
begins silent except for its last 15 seconds when
warning tones turn on. ON with silent exit delay. Audible entry delay.
is pressed twice.
Press (the “f - key” Function Key)
and then press
Or, if programmed, Secure Arm by pressing these
buttons and then entering your PIN.
Example: Quick Arm:
Press then again, then
Or, if programmed, Secure Arm by pressing these
buttons and then entering your PIN.
Put system in STAY with silent exit delay. Entry
delay begins silent except for its last 15 seconds
when warning tones turn on. STAY with silent exit delay. Audible entry delay.
is pressed twice.
Press and then
Or, if programmed, Secure Arm by pressing these
buttons and then your PIN.
Example: Quick Arm:
Press then again, then
Or, if programmed, Secure Arm by pressing these
buttons and then your PIN.
STAY, silent exit delay. No entry delay – instant Alarm if door opened.
Press and then
Or, if programmed, Secure Arm by pressing these
buttons and then your PIN.
is pressed twice.
Example: Quick Arm:
Press then again, then
Or, if programmed, Secure Arm by pressing these
buttons and then your PIN.
1
2
3
1
2