8 zone keypad operation, 2 zone keypad operation – Interlogix XL 4 Zone LCD User Manual

Page 6

MONITOR ISM™/AFx™ Multi-Tenant Apartment Security System User Guide 22-9050 v1.3

8 Zone Keypad
Operation

2 Zone Keypad
Operation

To do a “SEND HELP” Alert (to Building Security)

Press both buttons at the same time on either side
of the keypad symbols. Example:

for fire dept.

for police

for special alert

Press the

and

keys at the same time for a

specific alert:

Check with your Security Representative to find

out the details of your specific alert.

If an error is made when making key presses at a keypad

Press (escape) and start over.

Press (escape) and start over.

Turning system OFF or Silencing an ALARM condition (keypad tones continuously).
Enter your PIN # by pressing the respective number
keys. Enter PIN # only.
Example:
1-2-3-4

Enter your PIN # by pressing the respective
number keys. Enter PIN # only.
Example:
1-2-3-4

Turning ON (leaving) with entry/exit delay tone.

The Green light under the check mark

on either of the two keypads has to be on.

It means that all your sensor zones are secure.
If one or more of your keypad red sensor zone lights are on, find out why and secure what is connected to
them. Example: if light 1 is on, close the front door before arming to ON

The 8 Zone

Keypad has 8

sensor

zone

lights.

The 2 Zone has
2 sensor zone lights.

Press this button for Quick Arm to ON:

on the keypad.

Or, if programmed, Secure Arm, pressing this
button and then entering your PIN.
When the keypad starts beeping, leave by the front
door.

Press these buttons for Quick Arm to ON:

(Command

Key)

and then press

Or, if programmed, Secure Arm: press

then 3

then entering your PIN on the keypad.
When the keypad starts beeping, leave by the front
door.

1 2