Interlogix TruVision IP Open Standards Box User Manual - Manual (Page 11)

1BChapter 2: Installation
Figure 4: External alarm output
Accessing the SDHC card
Insert an SDHD car dup to 32GB for local storage as a backup in case the
network fails, for example (see Figure 5 below). The card is not supplied with the
camera.
Video and log files stored on the SDHC card can only be accessed via the Web
browser. You cannot access the card using TruVision Navigator or TVR 60.
Figure 5: SDHC card slot location in the cameras
SDHC card slot
Setting up the camera
Note:
If the light source where the camera is installed experiences rapid, wide-
variations in lighting, the camera may not operate as intended.
To quickly put the camera into operation:
1. Connect the lens to the camera.
2. Prepare the mounting surface.
3. Mount the camera to the ceiling using the appropriate fasteners. See
“Mounting the camera on a ceiling” on page 8.
TruVision IP Cam Open-Standards User Manual 7