Interlogix TruVision IP Megapixel PTZ Configuration Manual - Manual (Page 53)

3BChapter 4: Camera management
TruVision IP PTZ Camera Configuration Manual 49
To define an IP address filter:
1. In the Security folder, click the IP Address Filter tab to open its window.
2. Check the Enable IP Address Filter checkbox.
3. Select the type of IP address filter in the drop-down list, Forbidden or
Allowed .
4. Click Add to add an IP address.
5. Click Modify or Delete to modify or delete the selected IP address.
6. Click Clear to delete all the IP addrsses.
7. Click Save to save changes.
Telnet
To define Telnet:
1. In the Configuration folder, select the Security folder.
2. Select the Telnet tab.
3. Check the checkbox of Enable Telnet .
4. Click Save to save changes.
Restore default settings
Use the Default menu to restore default settings to the camera. There are two
options available:
 Restore: Restore all the parameters, except the IP parameters, to the default
settings.
 Default: Restore all the parameters to the default settings.