Interlogix TruVision IP Megapixel PTZ Configuration Manual - Manual (Page 46)

2BChapter 3: Camera configuration
42 TruVision IP PTZ Camera Configuration Manual
4. Select whether the recording will be for the whole week ( All Day recording) or
for specific days of the week.
If you have selected “All Day” (1), select one of the record types to record
from the drop-down list box:
• Normal: This is continuous recording.
• Motion detection: The video is recorded when the motion is detected.
• Alarm: The video is recorded when the alarm is triggered via the external
alarm input.
• Motion | Alarm: The video is recorded when the external alarm is
triggered or the motion is detected.
• Motion & Alarm: The video is recorded when motion and alarms are
triggered at the same time.
5. If you selected “Customize” (2), click the day of the week required and then
for period 1 set the start and end times during which you want the camera to
begin and end recording.
From the drop-down list box, select one of the record types to record.
Repeat for additional periods in the day. Up to four time periods can be
selected.
Note: The time periods cannot overlap.
6. Set the recording periods for the other days of the week if required.
Click Copy (3) to copy the recording periods to another day of the week.
7. Click OK and Save (4) to save changes.