Interlogix TruVision IP Megapixel PTZ Configuration Manual User Manual
Page 25
2BChapter 3: Camera configuration
TruVision IP PTZ Camera Configuration Manual
21
No.
Parameter
Description
18.
Local Output
When enabled, the BNC output can display image.
Note: Not all models support all these parameter settings.
OSD
In addition to the camera name, the camera also displays the system date and
time on screen. You can also define how the text appears on screen.
Figure 7: OSD settings menu
To position the date/time and name on screen:
1. In the
Image
folder (1), click the
OSD Settings
tab (2) to open its window.
2. Check the
Display
Name
(3) box to display the camera’s name on screen.
You can modify the default name in the text box of
Camera Name
.
3. Check the
Display Date
box (3)to display the date/time on screen.
4. Check the
Display Week
box (3) to include the day of the week in the on-
screen display.
5. Select the time format from the
Time format
list box (4).
6. Select the date format from the
Date format
list box (4).
7. Select a display mode for the camera from the
Display Mode
list box (5).
Display modes include:
•
Transparent & Not flickering
. The image appears through the text.