Interlogix TruVision IP Megapixel PTZ Configuration Manual User Manual

Page 36

2BChapter 3: Camera configuration

TruVision IP PTZ Camera Configuration Manual

3. Recording schedule: Define the schedule when motion detection can be

recorded. See “Recording schedule” on page 41 for further information.

4. Linkage: Specify the method of response to the alarm.

To set up motion detection:

1. In the

Events

folder (1), click the

Motion Detection

tab (2) to open its

window.

2. Check the

Enable Motion Detection

box (3). Check

Enable dynamic

analysis for motion

if you want to see in live view where the detected motion

has occurred.

Note:

Deselect the “Enable Motion Detection” option to disable the motion

detection alarm.

3. Click

Draw Area

(4). Click and drag the mouse on the live video image to

draw an area sensitive to motion detection.

Note:

You can draw up to eight motion detection areas on the same image.

4. Click

Stop Drawing

to finish drawing. Click

Clear All

to delete all areas

marked and restart drawing.

5. Move the

Sensitivity

slider (5) to set the sensitivity of the detection. All areas

will have the same sensitivity level.

6. Click

Edit

to edit the arming schedule. The Edit Schedule Time window

opens: