Interlogix TruVision 360° Configuration Manual - Manual (Page 39)

TruVision 360° Camera Configuration Manual 37
Defining Security Service
Figure 20: Security Service window
To define Telnet:
1. Click Configuration > Security > Security Service .
2. Check the Enable Telnet checkbox.
3. Enter the Telnet password and confirm it.
4. Click Save to save the changes.
Note:
1. The Telnet user name is root as default, and cannot be changed.
2. The default Telnet password is “ab12!”
3. The password should be set with at least 4-character password with at least one
letter and one number.
Restoring default settings
Use the Default menu to restore default settings to the camera. There are two options
available:
 Restore: Restore all the parameters, except the IP parameters, to the default
settings.
 Default: Restore all the parameters to the default settings.
Note: The video standard cannot be restored to default settings using Restore or
Default .
To restore default settings:
1. Click Configuration > Security > Maintenance .
2. Click either Restore or Default . A window showing user authentication appears.
3. Enter the admin password and click OK .
4. Click OK in the pop-up message box to confirm restoring operation.