Interlogix TruVision 360° Configuration Manual - Manual (Page 30)

28 TruVision 360° Camera Configuration Manual
Figure 14: Snapshot menu
Note: If you have configured the FTP settings and check Upload Picture in the FTP
window, the snapshots will be uploaded to the FTP. If you also check Upload
Snapshot for motion detection or alarm input, the snapshots will be uploaded to the
FTP when motion detection or an alarm input is triggered.
To set up snapshots:
1. Click Configuration > Events > Snapshot .
2. Check Enable Timing Snapshot to enable continuous snapshots. Check the
Enable Event-triggered Snapshot to enable event-triggered snapshots.
3. Select the desired quality of the snapshot.
4. Set the time interval between two snapshots.
5. Click Save to save changes.
Configuring NAS settings
You can use a network storage system (NAS) to remotely store recordings
To configure record settings, please ensure that you have the network storage device
within the network.
The NAS disk should be available within the network and correctly configured to store
the recorded files, log files, etc.