Interlogix TruVision 360° Configuration Manual - Manual (Page 37)

TruVision 360° Camera Configuration Manual 35
3. Click Save to save the changes.
Modifying user information
You can easily change the information about a user such as their name, password, and
permissions.
To modify user information:
1. Click Configuration > Security > User .
2. Click the Modify button. The user management window appears
3. Change the information required.
Note: The user “Admin” can only be changed by entering the admin password.
4. Click Save to save the changes.
Defining RTSP authentication
You can secure the data stream of live viewing.
Figure 18: RTSP Authentication window
To define RTSP authentication:
1. In the Security folder, click the RTSP Authentication tab to open its window.
2. Under Authentication , select Enable or Disable in the drop-down list to enable or
disable the RTSP authentication.
3. Click Save to save the changes.
Note: If you disable "RTSP Authentication", although the user has no permission to
“Remote: Live View", he can still see the live view image.
Defining IP Address Filter
This function makes it possible for access control.