Interlogix TruVision 360° Configuration Manual User Manual

Page 27

TruVision 360° Camera Configuration Manual

3. Recording schedule: Define the schedule during which motion detection can be

recorded. See “Defining a recording schedule” on page 30 for further information.

4. Linkage: Specify the method of response to the alarm.

To set up motion detection:

1. Click

Configuration

Events

Motion Detection

2. Check the

Enable Motion Detection

box.

Check

Enable Dynamic Analysis for motion

if you want to see motion real-time.

Note:

Deselect the “Enable Motion Detection” option to disable the motion detection

alarm.

3. Click

Draw Area

. Click and drag the mouse on the live video image to draw an area

sensitive to motion detection.

Note:

You can draw up to 8 motion detection areas on the same image.

4. Click

Stop Drawing

to finish drawing. Click

Clear All

to delete all areas marked and

restart drawing.

5. Move the

Sensitivity

slider to set the sensitivity of the detection. All areas will have

the same sensitivity level.

6. Click

Edit

to edit the arming schedule. See the picture below for the editing interface

of the arming schedule.

7. Choose the day and click

to set the detailed time period. You can copy the

schedule to other days.

8. Click

to save changes.

9. Specify the linkage method when an event occurs. Check one or more response

methods for the system when a motion detection alarm is triggered.