Interlogix NX-8V2 REV B Installation Manual - Manual (Page 11)

NX-8V2 Control Panel Installation Instructions 11
CP-O1 feature description Feature description as shown in
manual Program
location Seg/opt Default CP-01required setting
Call waiting cancel Must be programmed as part of
the phone number 0 n/a n/a Required (depends on
user phone line)
Recent closing 23 3/7 Enabled
Exit error 23 3/8 Enabled
Default changes (from prior
versions):
Power up delay 40 3 60 seconds
a> Refer to your keypad installation manual.
b> Combined abort window time and entry delay must not exceed one minute.