Interlogix MCR200-1T/1CX - Manual (Page 7)

IFS MCR200-1T/1CX User Manual 1
Overview
Package Contents
Check the contents of your package for following parts:
• MCR200-1T/1CX x1
• User’s Manual x1
If any of the items in the package are damaged or missing,
please contact your distributor or IFS sales rep. If possible,
retain the original carton and packaging material in case of
need to return the product for repair/replacement.
Ethernet over VDSL2 Bridge Description
The IFS state-of-the-art Ethernet-over-VDSL2 products are
based on two core networking technologies: Ethernet and
VDSL2 (Very-high-data-rate Digital Subscriber Line 2). This
technology offers the absolute fastest possible data
transmission speeds over existing lines or coaxial cables
without the need for rewiring.
The IFS MCR200-1T/1CX has a switching architecture with
RJ-45 10/100Mbps Ethernet port and one asymmetric or
symmetric Ethernet over VDSL port (Asymmetric refers to
different upstream and downstream rates while symmetric
refers to similar rates.) – which is a BNC Connector.
The MCR200-1T/1CX can be a data transceiver capable of
operating as a Central Office (CO) or Customer Premises
Equipment (CPE) mode via a DIP switch. The MCR200-
1T/1CX asymmetric performance is up to 100/65Mbps at
200m and up to 25/5Mbps for 3km. The MCR200-1T/1CX
symmetric performance is up to 100/100Mbps at 200m and up
to 17/13Mbps for 3km.