ILY DUO / DUO PLUS Blu-ray/DVD/CD Duplicator - Manual (Page 7)

Functions:
1. Copy – This command will copy the master disc placed in the designated Source Drive to all target
discs in the Writer Drives. This process burns all information contained on the master disc to the target
discs so the copies are exact duplicates of the master disc.
To Start the Copy Process:
1). Power on the machine (if not already on).
2). Eject disc tray of the Source Drive and place the master disc in the designated Source Drive
(usually the top drive ). The
“master disc” is the original of which copies are made from.
3). Eject disc tray(s) of the Writer Drives and place blank disc(s) on the tray(s). Number of drives
used depends on number of copies desired. It is not necessary to always use all drives.
4). Use the scroll buttons to select the com
mand “1. Copy” and press the ENT button. The drives
will automatically close trays and begin the copy process.
5). Once the copy process is completed, the disc trays will eject and the display will read
“Copy
Result: Pass X, Fail Y,” with X being the number of successful copies, and Y being the number of
failed copies. To reduce copy failure, please refer to the troubleshooting section of the manual.
2. Test – This command will simulate the copy process and make sure all target discs are usable. The
test process does NOT burn anything to the blank disc(s). A built-in diagnostic algorism is used to verify
the chance of successful copy for each target disc.
To start the Test Process:
1). Power on the machine (if not already on).
2). Eject disc tray of the Source Drive and place the master disc in the designated Source Drive
(usually the top drive). The “master disc” is the original of which copies are made from.
3). Eject disc tray(s) of the Writer Drives and place blank disc(s) on the tray(s). Number of drives
used depends on number of discs to be tested. It is not necessary to always use all drives.
4). Use the scroll buttons to select the com mand “2. Test” and press the ENT button. The
drives will automatically close trays and begin the test process.
5). Once the test process is complete, the disc trays will ej ect and the display will read “Result:
Pass X, Fail Y, with X being the number of discs that passed the test, and Y being the number of
failed copies. Use discs that have passed the test for the actual duplication.
3. Copy + Verify – This command will perform the copy process, and immediately follow with a
verification process on all target discs. This command is especially useful for audio CD duplication.
 Press “ENT”
 Start Copy
 Press “ENT”
 Start Test


 Finish and
Eject discs
 Finish and
Eject Discs
5