ILY DUO / DUO PLUS Blu-ray/DVD/CD Duplicator - Manual (Page 5)

11
SETUP
11.1 Startup Menu
Assigns a command to be displayed first after the duplicator has been
initialized.
11.2 Auto Start
Sets auto start time from OFF (no auto start) to 99 sec. Allows the duplicator
to automatically start one of six following functions once the master disc and
desired number of target disc(s) are inserted and the drive trays are closed:
Copy, Test, Copy & Verify, Copy & Compare, Verify and Compare.
11.3 Display Mode
Sets the amount of information displayed on the LCD during the
performance of various functions.
11.4 Beep Enables or disables the audio feedback when buttons are pressed.
11.5 Power on Eject
Allows the duplicator to eject disc tray(s) with disc present inside upon boot-
up.
11.6 Reader Speed Sets the speed at which discs are read during various processes.
11.7 Compare Speed Sets the speed at which the compare process is executed.
11.8 Skip Read Error
Enables the option to halt the duplication process if there is an error on the
master disc. Disables the option to allow the process to continue with the
same errors as the master disc.
11.9 Language Allows different language selections for LCD display.
11.10 Clear Setup
Clears the CMOS and resets the duplicator controller back to factory
defaults.
11.11 Advance Setup Functions for advanced users
11.11.1 Power On
Time
Sets system warm up time from 5 sec to 99 sec. Default is 15 seconds.
11.11.2 CD Overburn Enables or disables the duplication of overburned CDs.
11.11.3 Boot
Password
Sets password protection for machine boot-up.
11.11.4 Setup
Password
Sets password protection for changing setup options.
11.11.5 Copy CD-
TEXT Enables or disables the copying of the CD subcode (CD-TEXT) information
for audio CDs.
11.11.6 Copy
UPC/ISRC
Enables or disables the copying of the CD subcode (UPC/ISRC) information
11.11.7 Copy CD+G Enables or disables the copying of the CD subcode (CD+G) information
11.11.8 Auto Erase
Enables or disables the erasing of the information from rewritable CD’s or
DVD’s
11.11.9 Pre-gap
Scan
Pre-gap on audio CD is gap between tracks.
11.11.10 L0 Break
Point The layer 0 break point is the place to switch from the first layer (L0) to
second layer (L1). Duplicator allows user to set option for this breaking point.
11.11.11 Show
Result
Option to allow the result to display on LCM
11.11.12
Performance
Allow user to set priority of burning for performance.
11.11.13 Set Time
Zone User can adjust time zone setting for optical disc with UDF(Universal Disk
Format)
11.11.14 Show Image
Name
Allow to display image file name on LCM.
3