ILY DUO / DUO PLUS Blu-ray/DVD/CD Duplicator User Manual

Page 6

HDD MANAGER

The management for various functions of the hard disk drive (HDD).
Note: For this function and submenu to be displayed, a HDD must be
installed in the duplicator.

12.1 Select Image

Selects an image file as a source to be copied to the discs.

12.2 Disc Image

Loads an image to the HDD from a master CD, DVD or BD as an Image file.

12.3 Image Info.

Displays the image file information such as image order, name, file size and
type of image.

12.4 Rename Image

Renames the HDD image partition name up to 8 characters.

12.5 Delete Image

Deletes an image file in HDD. Note: If the source file is selected to delete,
the last file on the HDD will automatically be assigned as a new source file.

12.6 HDD Info.

Displays the information in HDD, such as the number of discs stored on the
HDD and the amount of space left in the HDD.

12.7 Format HDD

Formats the HDD, erasing ALL data stored on the HDD.

12.8 HDD Setup

12.8.1 Load and
Copy

Allows an image to be loaded onto the HDD from a master CD, DVD or BD
and automatically copied on to the target disc(s).

12.8.2 Failed Image

Delete or reserve the failed image.

12.8.2 Default Image

Selects the default image from the hard drive.

Flash To Disc

13.1 Disc Spanning

Allows for a large capacity USB source to be copied across multiple target
Discs

13.2 Multi Session

Allows for data from multiple USB source to be copied to a single disc.

13.3 Oversize File

Allow to select Reject/Stop or Skip the whole operation if the Master Disc file
size is larger than the target disc.

13.4 Set Span Mode

Allow to select spanning options to single or multiple targets disc.

13.5 Test Write

This function simulates copy process to test that source and target disc are
good. This Process only functions as a test does not actually copy to the disc

Flash To Flash

14.1 Copy File

Copies files stored in your source USB flash drive to your target USB flash
drive.

14.2 Copy Disk

Copy data area, including data and partition table (system information).

14.3 Disk Copy Area
Setup

Allows you to choose copying system and files or whole media