ILY DUO / DUO PLUS Blu-ray/DVD/CD Duplicator - Manual (Page 18)

After select, press
“ENT” to confirm
11.11.11 Show Result: Allows the result to display on LCM.
Available Options: Enable or Disable
11.11.12 Performance: Allow user to set priority of burning for performance. Options are
Speed, Balance, Compatibility and Auto. By option Speed, duplicator can provide
maximum data transfer rate. For some ODD drive with compatibility issue,
Compatibility can provide maximum range to work but less transfer rate.
11.11.13 Set Time Zone: Allows you setup a time zone for your specific region based on
GMT to time stamp your copies.
Options are: GMT
0, GMT +1, … GMT +13, GMT -12, GMT -11, … GMT -1.
11.11.14 Show Image Name: Allow to display image file name on LCM
Options: Enable or Disable
12. HDD Manager – This command is for the management of the hard disk drive (HDD) installed in
the duplicator. Note: This feature is only available on duplicators with a HDD installed. If there is no HDD present in the
duplicator, this feature will NOT show in the menu of commands.
12.1 Select Image: Allows the selection of the image(s) present on the HDD to be used as
source. The Scroll buttons cycle through the image(s) on the HDD and the ENT button
confirms the selection while the BACK button cancels the selection. The image(s) are listed in
order of which they were loaded.
12.2 Disc => Image: Transfers the information from the master CD/DVD/BD to the HDD.
After the image(s) transfer is complete, the master disc is ejected and the source drive is
changed to the HDD.
Note: The Source Disc may be placed in the Reader Drive or any of the Writer Drives.
12.3 Image Info: Shows the image in sequential order, the file name of the image stored on
the HDD, the type of image stored, and the amount of data the image contains.
 Select “By Source”
or “Optimization”
 Press “ENT”  Press ▲▼
to select image
 Press “ENT”  Start loading
 Start Copy
Disc to HDD
16