ILY SATA Blu-ray/DVD/CD Duplicator Controller - Manual (Page 7)

11.7 Compare Speed Sets the speed at which the compare process is executed.
11.8 Skip Read Error Enables the option to halt the duplication process if there is an error on the
master disc. Disables the option to allow the process to continue with the same
errors as the master disc.
11.9 Language Allows different language selections for LCD display.
11.10 Clear Setup Clears the CMOS and resets the duplicator controller back to factory defaults.
11.11 Advance Setup Functions for advanced users.
11.11.1 Power On Time Sets system warm up time from 5 sec to 99 sec. Default is 15 seconds.
11.11.2 CD Overburn Enables or disables the duplication of overburned CDs.
11.11.3 Boot Password Sets password protection for machine boot-up.
11.11.4 Setup Password Sets password protection for changing setup options.
11.11.5 Copy CD-TEXT Enables or disables the copying of the CD subcode (CD-TEXT) information for
audio CDs.
11.11.6 Copy UPC/ISRC Enables or disables the copying of the CD subcode (UPC/ISRC) information.
11.11.7 Copy CD+G Enables or disables the copying of the CD subcode (CD+G) information.
11.11.8 Auto Erase Enables or disables the erasing of the information from rewritable CD’s or DVD’s
11.11.9 Image Fail When image file fails to load into HDD, that file can be deleted from HDD.
12 HDD MANAGER The management for various functions of the hard disk drive (HDD).
Note: For this function and submenu to be displayed, a HDD must be installed in
the duplicator.
12.1 Select Image Selects an image file as a source to be copied to the discs.
12.2 Disc=>Image Loads an image to the HDD from a master CD, DVD or BD as an Image file.
12.3 Image Info. Displays the image file information such as image order, name, file size and type
of image.
12.4 Rename Image Renames the HDD image partition name up to 8 characters.
12.5 Delete Image Deletes an image file in HDD. Note: If the source file is selected to delete, the
last file on the HDD will automatically be assigned as a new source file.
12.6 HDD Info. Displays the information in HDD, such as the number of discs stored on the
HDD and the amount of space left in the HDD.
12.7 Format HDD Formats the HDD, erasing ALL data stored on the HDD.
12.8 Load & Copy Allows an image to be loaded onto the HDD from a master CD, DVD or BD and
automatically copied on to the target disc(s). Select from 3 modes: Synchronous,
Load First and Off.
5