ILY SATA Blu-ray/DVD/CD Duplicator Controller User Manual

Page 12

to select drive

Press ENT to finish Setting

9. Track Edit – This command allows users to select tracks from multiple audio CDs and burn to target

CDs. This command also closes edited audio CDs and displays the disc information.

To create and copy custom compilation audio CDs from multiple master discs:

1. Power on the machine (if not already on).

2. Use the Scroll buttons to select “9. Edit Track”. Press the ENT button.

3. The display will read “[Edit Track] 1. Copy Track”. Press the ENT button.

4. The display will read “Waiting….Master Disc”. Insert the first master disc and press the ENT button.

5. Once the master disc is successfully read, the display will read “Waiting….Blank Disc”. Insert blank

disc(s) into writer drive(s) and press the ENT button.

6. The number of tracks on the master CD will be displayed on the lower half of the screen. Use the

Scroll buttons to select track(s) to be copied. In alphabetical order, a lower-case letter will be

assigned to the tracks selected.

7. Once the selection of tracks is finished, use the Scroll buttons to select “OK” at the end of the numeric

listing of tracks. Press the ENT button.

8. The duplicator will begin copying the selected track(s) to the target CD(s). Once the copy process is

completed, the display will read the number of tracks that are currently on the target CD(s), time used

on the target CD(s) and time left (free spaces). Press the ENT button.

9. The display will now read “[Edit Track] 1. Copy Track”. If tracks from a different master CD are

desired, press the ENT button and repeat steps 4 through 8 for each different master CD. If selection

of tracks is completed, proceed to step 10.

10. Use the Scroll buttons to select “[Edit Track] 2. Close Disc”. Press the ENT button.

11. The target disc(s) will now be finalized and closed for completion. Once completed, the disc(s) will be

automatically ejected. This concludes the Edit Track process.

Press ENT

or and

press

ENT to

select tracks

to OK and press

ENT to start burning

Repeat steps for next

master or press

and

ENT to close discs

Finish and eject disc

Note: A copied audio CD must be closed (finalized) before it can be played back.

a. Once all tracks to be copied have been selected, press

to select “OK” on the display.

Press ENT to confirm and begin the copy process.

b. Once the track selection is entered, the LCD screen will read “Copying Audio Tracks…”,

and display the track number, total time of current track and the current copying status.