ILY SATA Blu-ray/DVD/CD Duplicator Controller - Manual (Page 6)

9 TRACK EDIT Allows for the selection of individual track(s) from different master audio CDs to
create custom compilation.
9.1 Copy Track Allows the selection of individual track(s) from the master CD and copies the
selected track(s) onto all target discs.
9.2. Close Disc Closes the target discs when all of the track(s) are burned on to all target discs.
Note: The copied disc(s) will NOT play back without this step. Do NOT skip this
step.
9.3 Disc Info Displays the information regarding the track(s) on the disc(s) and how much
space is remaining on the target disc(s).
10 UTILITY
10.1 Pre-scan Performs a scan on the master disc before the copy process starts and ensures
the master disc can be copied in the duplicator.
10.2 Quick Erase Erases content on the media (CD-RW, DVD+/-RW, DVD+/-RW DL and BD-RE).
10.3 Full Erase Erases all data on the media (CD-RW, DVD+/-RW, DVD+/-RW DL and BD-RE).
10.4 Eject All Trays Ejects all disc trays, including source drive.
10.5 Disc Info. Displays basic information of the discs inserted, such as disc type, amount of
data on disc for master disc(s) (in MB) and media book type. For blank media,
displays the media book type, available space and speed of the media.
10.6 Drive Info. Displays information of all drives in the duplicator including the Reader, HDD (if
present) and Writer drive(s).
10.7 System Info. Displays the duplicator controller information, such as the hardware version,
buffer memory and currently loaded firmware.
10.8 Update BIOS Updates the firmware for the controller.
Note: Please make sure that the firmware is approved by the manufacturer and
compatible with the duplicator before performing the update.
10.9 Copy Counter Counts the number of successful and failed copies of CD and DVD made by the
duplicator.
11 SETUP
11.1 Startup Menu Assigns a command to be displayed first after the duplicator has been initialized.
11.2 Auto Start Sets auto start time from OFF (no auto start) to 99 sec. Allows the duplicator to
automatically start one of six following functions once the master disc and
desired number of target disc(s) are inserted and the drive trays are closed:
Copy, Test, Copy & Verify, Copy & Compare, Verify and Compare.
11.3 Display Mode Sets the amount of information displayed on the LCD during the performance
of various functions.
11.4 Beep Enables or disables the audio feedback when buttons are pressed.
11.5 Power on Eject Allows the duplicator to eject disc tray(s) with disc present inside upon boot-up.
11.6 Reader Speed Sets the speed at which discs are read during various processes.
4