IC Realtime 540TVL Box Style IP Cameras (ICIPS565) - Manual (Page 42)

42
9 FAQ
Bug
I can not boot up
the device. Please click RESET button for at least five seconds to restore
factory default setup.
SD card hot swap Before draw out SD card, please stop record or snapshot first and
then wait for at least 15 seconds to remove the SD card.
All the operations before is to maintain data integrity.
SD card write
times Do not set the SD card as the storage media to storage the
schedule record file. It may damage the SD card duration.
I can not use the
disk as the storage
media. When disk information is shown as hibernation or capacity is 0,
please format it first (Via Web).
I can not upgrade
the device via
network.
The status indication light is shown as red when network upgrade
operation failed. You can use port 3800 to continue upgrade.
Recommended SD
card brand Kingston 4GB、Kingston 1GB、Kingston 16GB、Transcend
16GB、SanDisk 1G、SanDisk 4G
Usually we recommend the 4GB (or higher) high speed card in case
the slow speed results in data loss.
Electronic PTZ
operation
(For F725 series
only) If you want to use electronic PTZ, please set the protocol as EPTZ.
The device only supports electronic PTZ operation when the IPC
resolution is less than SVGA.
Audio function Please use active device for the audio monitor input, otherwise there
is no audio in the client-end.
Note
z This user’s manual is for reference only. The wireless network function is for W series
only and 3G function is for special series only.
z Slight difference may be found in user interface.
z All the designs and software here are subject to change without prior written notice.
z Please visit our website for more information.