IC Realtime 540TVL Box Style IP Cameras (ICIPS565) - Manual (Page 41)

41
If you are using the IP address in the WAN, you can follow the above steps too. You can access
the IP address in the WAN first and then set the wireless IP address in the Network interface
(Figure 8-2).
8.3 Web Setup
Please follow the steps listed below to implement Web setup.
z
Click SSID search button to search the wireless router available.
z Check the enable box to enable wireless configuration function.
z Double click the wireless router SSID to begin the setup. System can configure the mode
and WEP encryption mode automatically (according to your wireless router setup).
z If the wireless router adopts the WEP encryption mode, you need to set the corresponding
encryption information manually. You can select mode, WEP mode, and key type. Click the
save button to save current setup and then click refresh button to view the latest setup
information. You can skip to the next step if your wireless router does not use WEP
encryption function.
z After setting the wireless router and device parameter, you can remove the device network
cable and then access the device in the wireless mode.
Figure 8-3
Please refer to the Web Operation Manual included in the resource SD for detailed operation
instruction.