IC Realtime Flex Series: 8-CH High Performance H.264E 2U DVR with DVD-RW - Manual (Page 16)

6
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series
DVR for the first time, please refer to this part first.
2.1 Front Panel
The Front panel is shown as follows. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Power button, press this button for three seconds to boot up
or shut down DVR.
0
In text mode, input number 0.
It is the space button.
1,. In text mode, input number 1 and denotation.
2ABC
In text mode, input number 2(English character A/B/C)
3DEF
In text mode, input number 3(English character D/E/F)
4GHI In text mode, input number 4 (English character G/H/I)
5JKL In text mode, input number 5(English character J/K/L).
6MNO
In text mode, input number 6 (English character M/N/O)
7PQRS In text mode, input number 7 (English character P/Q/R/S).
8TUV In text mode, input number 8 (English character T/U/V).
9WXYZ
In text mode, input number 9 (English character W/X/Y/Z)
Number and
Character
-/--
If you want to input a number more than 10, please click this
button and then input.
Shift
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up
and down.
Increase/decrease numeral.
Up
Down
S、T
Assistant function such as PTZ menu.