IC Realtime Flex Series: 8-CH High Performance H.264E 2U DVR with DVD-RW User Manual
Page 154
144
Start all/
stop all
Check the corresponding All button, you can enable or disable all
channels record.
7.8.5 System
7.8.5.1 General
The general interface includes General, date/time and holiday setup.
7.8.5.1.1 General
The general interface is shown as in Figure 7-63.
Figure 7-63
Please refer to the following sheet for detailed information.
Parameter Function
Device ID
It is to set device name.
Device No.
It is device channel number.
Language
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
Video
Standard
This is to display video standard such as PAL.
HDD full
Here is for you to select working mode when hard disk is full. There
are two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no
empty, then system stops recording, If the current HDD is full and
then next HDD is not empty, then system overwrites the previous
files.
Pack
duration
Here is for you to specify record duration. The value ranges from 1
to 120 minutes. Default value is 60 minutes.
7.8.5.1.2 Date and time
The date and time interface is shown as in Figure 7-64