Heli-Max HMXE0802 - Manual (Page 8)

assembly instructions
Install Batteries in the Transmitter
o Remove the battery cover from the back of the transmitter and remove the
battery box. Install eight (8) “AA” batteries into the battery box. Double-check the
polarity of each battery before placing the battery box back into the transmitter
and replacing the battery cover.
o Turn on the transmitter using the power switch as shown above and verify that
the indicator illuminates. Turn the transmitter off for now. If the indicator did not
illuminate, remove the battery box from the transmitter and verify that the batteries
were installed correctly.
8