Heli-Max HMXE0802 - Manual (Page 19)

19
maintenance & repair
The Heli-Max ™ Novus CX and FP are very small helicopters. Working on these
small models will require very small tools. The DTXR0170 DuraTrax ® Precision
Phillips Screwdriver 00x75mm is recommended for both the Novus CX and FP.
Both the Novus CX and FP are very sturdy helicopters. On occasion it will be
necessary to replace damaged parts after a crash. Please use this section as a
guide to performing these steps.
NOVUS FP – MAIN ROTOR BLADE REPLACEMENT
Remove the blade bolt using
a #00 phillips screwdriver.
After the blade bolt has been
removed, slide the rotor blade
out of the blade grip. Reinstall
the new blade, ensuring that
the holes within the blade and
blade grip are aligned properly.
Reinstall the blade bolt.
NOVUS FP – MAIN ROTOR GRIP REPLACEMENT
Remove both blade bolts and
main rotor blades. Remove the
flybar linkage from the blade
grips. Remove the two blade
grip screws and the blade
grips can be easily removed.
Reinstall the parts in the
reverse order listed above.