Heli-Max HMXE0802 - Manual (Page 22)

22
NOVUS FP – REPLACING A MOTOR
Unplug the motor from the
E-Board and remove the
motor
mounting screws.
Remove the old motor and
install the new motor. Reinstall
the motor mounting screws
and plug the motor connector
back into the E-Board.
NOVUS FP – E-BOARD CONNECTIONS
In addition to the connections
there is an adjuster located
on the other side of the
E-Board. This adjuster is used
to increase or decrease the
total servo throw. This is set
at the factory for the optimum
setting. After you have become
accustomed to the model, feel
free to make adjustments to
suit your flying style.