beautypg.com

Replacing the main gear, Replacing the main shaft – Heli-Max HMXE0807 User Manual

Page 22

background image

22

Replacing the Main Gear

Remove the lower retaining pin from the main gear using needle nose pliers.
Remove the old main gear from the model and install the new main gear. Align
the hole in the main shaft with the hole in the main gear and press the small pin

back through the hole.

Replacing the Main Shaft

Remove the lower retaining pin from the main gear using needle nose pliers.
Disconnect the servo linkages from the swashplate. Slide the main shaft straight

up and out of the main frame. Remove and transfer necessary parts to the new
main shaft and reinstall by reversing the order listed above.

See also other documents in the category Heli-Max Air equipment: