Heli-Max HMXE0807 - Manual (Page 21)

21
Main Rotor Grip Replacement
Remove both blade bolts and main rotor blades. Remove the linkages from
both blade grip mixers. Remove the two spindle screws and the blade grips can
be easily removed. Reinstall the parts in the reverse order listed above.
Replacing the Flybar
Loosen the screws on both fl ybar paddle collars. Rotate the paddles counter
clockwise to remove the paddle and the collar from the fl ybar. Loosen the
screws on the fl ybar carrier (both sides). At this point the fl ybar can be slid out
of the fl ybar carrier. Slide the new fl ybar into the fl ybar carrier and ensure that
the new fl ybar is centered. Tighten the fl ybar carrier screws and reinstall the
paddles. Ensure that the paddles are equal distances out on the fl ybar and
tighten the fl ybar paddle collar screws.