Heli-Max HMXE0837 - Manual (Page 12)

12
®
PROGRAMMING THE Tx-R MODEL PROGRAMMING THE Tx-R MODEL
Your 1SQ V-cam uses Tactic’s SLT protocol for communication.
If using the Anylink with your non SLT protocol radio system
you must make sure to follow the proper mapping procedure
listed with the Anylink that matches your radio brand. Failing
to do so could cause an unsafe condition. How to map your transmitter, as
well as a list of compatible transmitters, is included with your Anylink. You
can fi nd this and more information on the Tactic website, www.tacticrc.com
To get the most from your V-cam, your transmitter should have assignable
switch capabilities and a momentary contact switch, but neither is needed to
fly the V-cam. If you have a 7 or more channel transmitter you can command
all the features of the V-cam. Truth is, a 6 channel aircraft radio system like
the Tactic 600 will work great AND, you will still be able to flip and take video
with your V-cam! It’s also important to note that even a dial can be used to
turn the video on and off.
NOTE: The switch for Flipping, Video and Photo taking must be either channel
5, 6, 7 or 8
th of the transmitter. If you have a 6 channel transmitter, you will
only be able to define flip and video functions (in that order). To setup all
three functions one would need at least a 7 channel transmitter. For example,
the flipping feature cannot be skipped to allow a 6 channel transmitter to
control video and still pictures.
®
LINKING LINKING
WARNING: AnyLink must be in Normal Mapping (1 Beep) when
Futaba or Hitec ® transmitters are used with Tx-R aircraft. If
using Spektrum, ® JR, ® or Graupner ® transmitters, AnyLink
must be in Alternate Mapping (2 Beeps). (See AnyLink manual.)
All trademarks are the property of their respective owners.
Setup Note: Your radio should be programmed in “Airplane” mode.