GTCO QuikRuler - Users Guide - Manual (Page 23)

QuikRuler 23
Measuring a Continuous Length
Use the function to measure a curved length. Follow these steps:
 Select
 Choose the starting point of the length.
 While holding the stylus down, trace along the length until you reach the ending
point.
 Lift the stylus tip.
 QuikRuler III displays the length of the line.
 If the segment is a straight line, you can measure it in a similar way to the Length
Segment function. Select the starting point of the line and then pick the stylus
up and choose the ending point.
Adding or Subtracting Lengths
To add or subtract lengths, follow these steps:
 Measure the first length.
 Press or
 Measure the next length.
 If necessary, repeat the previous two steps to add or subtract additional lengths.