GTCO QuikRuler - Users Guide - Manual (Page 14)

QuikRuler 14
 Choose repeatedly or use and until Last Character is
displayed on line 1.
 The currently selected last character is displayed on line 2.
 Use and repeatedly until you see the last character that you want to use:
Enter
Tab
Down Arrow
<

>
Right Arrow
<

>
 Select or choose another option or function.
Setting Scale and Units
Use the and functions to tell QuikRuler the scale of the drawing you
are measuring and the units in which you want measurements to be displayed.
Identifying the Unit of Measure
Use the function to identify the units in which you want measurements to be
displayed. (See the next sections for details about setting the scale of measurements.)
For example, suppose you are working with a map where 1 centimeter represents 3
kilometers. You would first use to tell QuikRuler to measure your drawing in
centimeters and display the result in kilometers. Next, you would use to set a
1:3 scale.
NOTE: You can also choose at any time to convert the current measurement,
shown on the second line of the display, to a different unit of measure.