GTCO QuikRuler - Users Guide - Manual (Page 10)

QuikRuler 10
 Press the stylus on the left point of the menu.
 QuikRuler prompts you to Select Right Pnt.
 Press the stylus on the right point of the menu.
Relocating the Menu while Working with QuikRuler
You can change the location of the menu at any time while working with QuikRuler.
 Select
 Choose a place the menu and tape it down.
 QuikRuler prompts you to Select Left Pnt.
 Press the stylus on the left point of the menu.
 QuikRuler prompts you to Select Right Pnt.
 Press the stylus on the right point of the menu.
See the previous page for an illustration of the left and right menu points.
If You Lose the Menu Location
 Tape the menu down where you want it to be.
 Disconnect the power supply.
 Reconnect the power supply and listen for four beeps.