GTCO QuikRuler - Users Guide User Manual
Page 21
QuikRuler 21
Follow these steps to add or subtract areas:
Measure the entire area, as described in the previous sections.
Select
or
Measure the area to be added to or subtracted from the first area.
If necessary, repeat the previous two steps to add or subtract additional areas.
Click on the
button to calculate the total.
Measuring the Length of a Perimeter
QuikRuler can instantly calculate the length of an area’s perimeter. After measuring an
area:
Select
to display the length of the area’s perimeter.
NOTE: Only the perimeter of the most recently measured area is displayed. Perimeters of
multiple areas are not summed unless the areas are measured in
mode.
Counting the Elements of Your Drawing
Use the
function to count the elements of your drawing, such as rooms, or
walls, or electrical outlets. You can count at any time, even while you are using another
function.
Follow these steps: